Skip Go to menu

myAuckland Auckland Council

Menu myAUCKLAND login

My property rates
My dogs
Online applications, bookings and payments

My reported problems
Community venues bookings
Inorganics bookings

Accommodation bookings
Event permits
Consents, licences and property applications

Sports facility bookings
Building and swimming pool inspections

Do I need a consent - Garden shed

Saved contacts

Search for a contact
Search for a contact you have already added.

Company Search

Search for a registered company
Enter company name, company number or NZBN number

Searching please wait...

LBP Search

Search for a licensed building practitioner
Enter name or LBP number. If unsure, searching for just a name or keyword will find related results.

Searching please wait...

Change access settings

What do you want to give them access to?

Access has been changed

Allocate access to existing user

What do you want to give them access to?

Enter their email address

User doesn't exist in system. Invite user to register

Your invite was sent successfully
You can manage their access from the application details page.

Sending invitation, please wait...

Are you sure you want to cancel?

You are about to cancel and head back to the dashboard page. Unsaved changes would be discarded.

Your browser does not appear to support JavaScript. You may want to try one of the following:

Turn on JavaScript in your browser if it supports it.
Use a browser that supports JavaScript.
Try a JavaScript-free version of this page, if made available by the application author.

Session gone

You will have to re-login once again to be able to continue editing yForms.

Help

$xforms-template-label$$xforms-template-help$$xforms-template-hint$$xforms-template-label$$xforms-template-help$$xforms-template-hint$

Decision tool form for detached

Go to Content

Decision tool form for detached

garden shed

Disclaimer

The information in this online tool is presented only as a guide as to whether or not you will need a consent for your project. It does not supply a definitive legal answer and should not be relied upon to supply this. If you need more information, seek the opinion of a Licensed Professional such as a Licensed Building Practitioner (LBP) or Chartered Professional Engineer (CPEng).
LBPs are people who have shown through assessment that they meet the standard of skill and competence required in particular areas of building practice such as structure and weathertightness. They are assessed before getting a licence and need to keep their knowledge up-to-date to be re-licensed.
The council accepts no responsibility for the outcome provided by the tool if you have provided incomplete or inaccurate answers.
Your resource consent outcome has been assessed under the Auckland Unitary Plan (operative in part) excluding properties in the Hauraki Gulf Islands.
Additional consent(s) may be required if your site has been identified as being in a natural hazard area (e.g. flooding, soil instability) or if your property is under a special overlay (e.g. heritage protection)
A garden shed is a small building for storing tools and lawn mowers, or other items such as fertilizers.

Note: This tool only applies to garden sheds located on the ground floor and in urban zones.

Stage 1 - Identify zone

What Auckland Unitary Plan Zone will your project-name be in?

1. Enter your address in GeoMaps

2. Find out your zone

You will need to check if any Unitary Plan controls apply to your property such as precincts or overlays. You can find this in the left hand column under your zoning. If additional controls apply, you will need to contact us or talk to a professional to find out if you need a consent.

Please check if any of the following Unitary Plan controls apply to your property.

Precinct
Overlays
Controls

3. What zone will your project-name be in?

Residential - Single House ZoneResidential - Large Lot ZoneResidential - Rural and Coastal Settlement ZoneResidential - Mixed Housing Suburban ZoneResidential - Mixed Housing Urban ZoneResidential - Terrace Housing and Apartment Buildings ZoneYou need to select an answer to proceed.

Decision tool params

HostURL

ProjectName

ImageURL

DB1 (calculates E)

What is the floor area of your proposed [project name]?

Why are we asking this question?

A building consent is only required if a [project name] covers an area over 10 square metres. You may be able to build up to 30 square metres subject to the involvement of registered professionals and/or the use of specified materials.

.You need to provide a value to proceed.

decision

DB1-value

Zone value

DB2

Will the proposed [project name] be single level or multi-level?

Why are we asking this question?

A building consent is required for multi-level buildings.

Single levelMulti-levelYou need to select an answer to proceed.

decision

A single level and a multi-level building

DB3

question - DB3

What is the greatest distance between the ground level and the floor level of your proposed [project name]?

Why are we asking this question?

A building consent is required if the distance between the supporting ground and floor is greater than 1 metre.

.You need to provide a value to proceed.

decision - DB3

image - DB3

How to measure distance between the floor and ground

DB4

What is the distance from the floor to the top of the roof?

Why are we asking this question?

A building consent is required if the distance from the floor to the top of the roof is greater than 3.5 metres.

.You need to provide a value to proceed.

decision - 3.5m (BC required)

image - DB4

How to measure the height between the floor and the top of the roof

DB5

question - DB5

What is the shortest distance between the proposed [project name] and the nearest boundary?

Why are we asking this question?

A building consent is required if the proposed [project name] is closer to the boundary than its own height. This is important as there must be enough space between buildings.

.You need to provide a value to proceed.

cln-message

image - DB5

Shortest distance between a sleepout and nearest property boundary

DB6

What is the distance between the proposed [project name] and the nearest residential building on the same site?

Residential building refers to the closest building being used for residential purposes (living, sleeping etc.)

Why are we asking this question?

A building consent is required if the proposed [project name] is closer to the nearest residential building than its own height.

.You need to provide a value to proceed.

image - DB6

Shortest distamce between a sleepout and property

DB7

Will the proposed [project name] have cooking, drinking water or sanitary facilities?

Why are we asking this question?

A building consent is required if the proposed [project name] has cooking, drinking water or sanitary facilities.

YesNoYou need to select an answer to proceed.

Oven, sink, toilet, shower and washing machine

Calculators

dummy-field

Hidden-calc1

E-param-value-holder

Comparison-percent-Bc-field-value.0

Comparison-percent-Imp-field-value.0

Comparison-percent-Ls-field-value.0

Show-Ls-selectionYesNo

Show-single-param-impsingletwo

Zone-value

Bc (4-params- A,B,C & E)

Please use the calculator below to work out the percentage of 'building coverage' in your property.
'Building coverage' includes:

Houses
Garages
Sheds
Eaves that project more than 750 mm horizontally from the exterior wall of the building
Decks greater than 1.5 metres in height

'Building coverage' does not include:

Pergolas
Swimming pools

Why are we asking this question?

This is to make sure there is balance between built structures and open spaces.

Property area.You need to provide a value to proceed.

Total area of shared driveway (optional).

Total existing 'building coverage' area.You need to provide a value to proceed.

Total area of proposed project-name.You need to provide a value to proceed.

Imp question

Please use the calculator below to work out the percentage of 'hard' surfaces in your property.
'Hard' surfaces include:

Gravel driveways
Sealed metal parking areas
Patios
Surfaces water cannot pass through

'Hard' surfaces do not include:

Slatted decks
Artificial grass
Permeable paving
Rain tanks
Swimming pools

Why are we asking this question?

This is to make sure that when it rains, stormwater runs off 'hard' surfaces and has somewhere to go.

Imp (2-params- D & F)

Total area of 'hard' surfaces.You need to provide a value to proceed.

Total area of existing slatted decks (optional).

Ls (2-params- G & H)

Please use the calculator below so we can work out your total 'green space' in your property.

Why are we asking this question?

This is to make sure there is a balance between built structures and green space.

Total area of existing uncovered decks that are less than 1 metre high (optional).

Total area of existing paved pathways that are less than 1.5 metres in width (optional).

LS-LA-Formula

calculation decision (with single param imp calc)

LS2-LA-Formula

Stage 4 - Your results

hidden input

Project type

Bc-Rc sections

Resource consent

You will need a resource consent.

According to the information you have provided, you will require a resource consent as your project-name:

Resource consent details

The following exceptions apply:

Exception details

As your project may be exempt from a resource consent, we recommend you call us on 09 301 0101 or e-mail onlineconsenting@aucklandcouncil.govt.nz.

You will need to apply for a resource consent for 'Adding a new project-name'.

You don't need a resource consent.

According to the information you have provided, your project-name will not require a resource consent.

Find out more about resource consents.

Building consent

You will need a building consent.

According to the information you have provided, you will require a building consent as your project-name:

Building consent details

The following exceptions apply:

Exception details

As your project may be exempt from a building consent, we recommend you call us on 09 301 0101 or e-mail onlineconsenting@aucklandcouncil.govt.nz

Please note

Construction cannot start until all required resource consents have been obtained.
If you are building over or close to a public wastewater or drinking water drain, you will need an approval from Watercare or Veolia.
If you are building over or close to a public stormwater drain, you will need an engineering approval from Council. Call us for more information on 09 301 0101.

You will need to apply for a building consent for 'Adding a project-name'.

You don't need a building consent.

According to the information you have provided, your project-name will not require a building consent under the following exemptions of Schedule 1 of the Building Act 2004:

Dynamic exeption links

Read more about building work that does not require a building consent from MBIE.

Please note

If you are using the proposed project-name for sleeping purposes, then there should be an existing dwelling on the site to provide access to cooking, drinking water and sanitary facilities.
Construction cannot start until all required resource consents have been obtained.
If you are building over or close to a public wastewater or drinking water drain, you will need an approval from Watercare or Veolia.
If you are building over or close to a public stormwater drain, you will need an engineering approval from Council. Call us for more information on 09 301 0101.
Check any other enactments or regulations (for example: Unit Titles Act, Land Transfer Act, Property Law Act, Hazardous Substances and New Organisms Act, Health and Safety at Work Act, Heritage New Zealand Pouhere Taonga Act, Auckland Council Bylaws etc.) and property rights that may affect the proposed work. It is the responsibility of the owner to check these prior to starting your project.
Make sure your proposed project is built to the New Zealand Building Code.

Find out more about building consents..

summary-image

What do I do next?

Customer journey for when a consent is required

Customer journey fo rwhe na consent is not required

footer

Disclaimer

The information in this online tool is presented only as a guide as to whether or not you will need a consent for your project. It does not supply a definitive legal answer and should not be relied upon to supply this. If you need more information, seek the opinion of a Licensed Professional such as a Licensed Building Practitioner (LBP) or Chartered Professional Engineer (CPEng).
LBPs are people who have shown through assessment that they meet the standard of skill and competence required in particular areas of building practice such as structure and weathertightness. They are assessed before getting a licence and need to keep their knowledge up-to-date to be re-licensed.
The council accepts no responsibility for the outcome provided by the tool if you have provided incomplete or inaccurate answers.
Your resource consent outcome has been assessed under the Auckland Unitary Plan (operative in part) excluding properties in the Hauraki Gulf Islands.
Additional consent(s) may be required if your site has been identified as being in a natural hazard area (e.g. flooding, soil instability) or if your property is under a special overlay (e.g. heritage protection)

Date Completed: 18/10/2021

email-o/p

E-mail yourself a summary of this advice:

Email address

You need to provide an email address to proceed.

Customer reference (optional)

EditComplete
Stage 1 - Identify zoneEditNot Started
DB1 (calculates E)EditNot Started
- decisionEdit
DB2EditNot Started
- decisionEdit
DB3EditNot Started
- question - DB3Edit
- decision - DB3Edit
- image - DB3Edit
DB4EditNot Started
- decision - 3.5m (BC required)Edit
- image - DB4Edit
DB5EditNot Started
- question - DB5Edit
- cln-messageEdit
- image - DB5Edit
DB6EditNot Started
- image - DB6Edit
DB7EditNot Started
CalculatorsEditNot Started
Stage 4 - Your resultsEditNot Started
- hidden inputEdit
- Bc-Rc sectionsEdit
- summary-imageEdit
- footerEdit
- email-o/pEdit